Skip to content

High-Performance Composite Bow

Build your own highly efficient historical horn composite bow and experience a new shooting sensation. I will show you how.

Together we build a horn composite bow based on Mongolian designs. The work takes place over three weekends. There must be at least three weeks between the first and second parts to allow the first sinew layer to begin drying. Between the second and third parts, we leave the second sinew layer to dry for at least six weeks. During the third weekend, we condition and tiller the bow to the desired draw weight. Final surface finishing may take place after the course.

We begin with a continuous core made from local wood, forming several curves through heat treatment.

During the final weekend, we cover the sinew backing on the back of the bow with deer rawhide or birch bark.

In the second part, we reinforce the belly with water buffalo or oryx horn, which we polish to a high gloss during finishing. Natural hemp bindings provide additional reinforcement.

Horn composite bow, view 1
Horn composite bow, view 2
Horn composite bow, view 3

The carefully designed reflex in the wooden core gives the bow substantial initial tension. This makes it highly efficient even at a short draw. A favourable string angle provides shooting comfort and a particularly smooth draw. The linear draw-force curve near full draw and the flat arrow trajectory, even at low draw weights, make it easier to hit at greater distances. Being able to hold at anchor for two seconds improves the chances of consistent results.

The bow is suitable for Fastflight strings. Arrow speeds of around 190 ft/s with an arrow mass of 8 grains per pound of draw weight make it enjoyable and competitive to shoot. A well-made 50 lb bow can achieve even higher arrow speeds.

Depending on your draw length and preferences, lengths of 62–68 inches are possible. During the course, draw weights of 35–60 lb can be made. The unusually long design for a composite bow makes it forgiving and particularly suitable for 3D archery. Bow classes: Historical Bow under IFAA rules, Longbow under WA rules and, on request, Longbow under IFAA rules.

Archer before drawing the bow
Archer at half draw
Archer at full draw